Adcom GTP-870HD Home Theater System User Manual


 
6
Chapter 1 - Welcome
GTP-870HD Owner’s Manual
Placing the GTP-870HD
Place the GTP-870HD on a stable, vibration-free sur-
face away from moisture and out of direct sunlight.
Your Adcom dealer will be pleased to show you many
different types of audio/video equipment racks and
cabinets.
The GTP-870HD’s rear panel is the central connect
-
ing point for almost every component in your audio/
video system. Be sure to leave sufficient room be-
hind the rear panel to accommodate cables, antenna
leads, power cords, etc. We recommend a minimum
of 5 inches of free space for maximum flexibility.
A distance of 1/2” should be maintained around the
GTP-870HD for ventilation. Keep your GTP-870HD in
a room where temperatures remain fairly moderate,
and never cover it with table cloths, curtains, news-
papers, etc., to avoid potential overheating.
About the Remote Control
The GTP-870HD comes with a universal, programma-
ble, backlit, ergonomic remote control that is ready
for action in every sense of the word.
For an overview of each remote button, see page
8.
To program the remote, see page 46.
Inserting the Remote Batteries
1 Remove the cover on the back panel of the re-
mote control.
2 Insert four AAA alkaline batteries, paying atten-
tion to the correct polarities.
3 Replace the cover.