Filter
Top Products
57
Chapter 4 - Operations
www.adcom.com
GTP-870HD Owner’s Manual
Selecting Surround Modes
If source components are the main course in your
home entertainment center, then Surround modes
provide the special sauce. Surround modes process
incoming audio signals and distribute them to your
speakers—with each mode configured to bring out
the unique flavor of your source material and send
just the right mix to suit your personal taste and spe-
cific speaker configuration.
• To set the default Surround mode for each input,
see page 33.
• To select Surround modes on the fly, press the
Mode button on the remote control or the Sur
Mode button on the front panel.
Dolby Surround Modes
DOLBY-D
Decodes the Dolby Digital 5.1-channel
bitstreams found on most commercial
DVDs, as well as some HDTV and digital
cable/satellite programs. Use if:
• Your source component is connected to the GTP-
870HD’s coaxial or optical digital audio inputs.
• Your source audio is in Dolby Digital 5.1 format.
• You have five speakers plus a subwoofer.
DOLBY-D EX
Decodes the Dolby Digital EX 7.1-channel digital bit
-
streams found on newer commercial DVDs. Use if:
• Your source component is connected to the GTP-
870HD’s coaxial or optical digital audio inputs.
• Your source audio is in Dolby Digital EX format.
• You have seven speakers plus a subwoofer.
DOLBY PL
Uses Dolby Pro Logic decoding to expand incoming
stereo signals to 4-channel surround sound, where
the surround channel is the same for both surround
speakers. Use if:
• Your source component is connected to the ana
-
log or digital audio inputs.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have five speakers (LF, RF, C, LS, RS).
PLII-C, PLII-M, PLII-P
Uses Dolby Pro Logic II decoding to expand incoming
stereo signals to 5-channel surround sound, where
the surround channel is discrete for both surround
speakers. Choose “C” for cinema, “M” for music, or
“P” for playing video games. Use if:
• Your source component is connected to the ana
-
log or digital audio inputs.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have five speakers (LF, RF, C, LS, RS).
PLIIX-C, PLIIX-M, PLIIX-P
Uses Dolby Pro Logic IIx decoding to expand incoming
stereo signals to 6.1- or 7.1-channel surround sound.
Choose “C” for cinema, “M” for music, or “P” for
playing video games. Use if:
• Your source component is connected to the ana-
log or digital audio inputs.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have six or seven speakers plus a subwoof-
er.
DTS Surround Modes
DTS
Decodes the DTS 6-channel digital bit-
streams found on many commercial DVDs.
Use if:
• Your source component is connected
to the GTP-870HD’s coaxial or optical digital au-
dio inputs.
• Your source audio is in DTS format.
• You have five speakers plus a subwoofer.
DTS-ES
Decodes the DTS-ES 8-channel digital bitstreams
found on newer commercial DVDs. Use if:
• Your source component is connected to the GTP-
870HD’s coaxial or optical digital audio inputs.
• Your source audio is in DTS-ES format.
• You have seven speakers plus a subwoofer.
NEO:6 C, NEO:6 M
Uses DTS Neo:6 decoding to expand incoming stereo
signals from movie or music sources (e.g., VHS tapes,
CDs or video games) to 6-channel surround sound.
Choose “C” for cinema, or “M” for music. Use if:
• Your source component is connected to the ana
-
log or digital audio inputs.
• Your source audio is in 2-channel analog or digi-
tal PCM format.
• You have five speakers plus a subwoofer.