Filter
Top Products
14
Chapter 2 - Connections
GTP-870HD Owner’s Manual
AM/FM Antenna Connections
Follow these steps to connect the supplied AM/FM
antennas to the GTP-870HD.
Connecting the AM Loop Antenna
1 Assemble the antenna.
• Rotate the base until it snaps into place.
2 Connect the antenna.
• Locate the AM antenna inputs.
• Press the lever next to one of the terminals
and insert one of the antenna leads into the
terminal. Release the lever to lock the lead
in place.
• Repeat for the other lead.
3 Position the antenna for best reception.
• To mount the antenna permanently, use
screws through the two holes in the base.
Connecting the FM Antenna
1 Assemble the antenna.
• Connect the supplied adapter to the FM an
-
tenna as shown.
2 Connect the antenna.
• Locate the FM antenna input, and securely
attach the FM adapter.
3 Position the antenna for best reception.
• Fully extend the antenna and experiment
with its position to obtain the strongest sig-
nal. You can attach it to a wall or other sur-
face (e.g., using push pins).
• The supplied antenna is for indoor use only.
AM
Antenna
Input
FM
Antenna
Input
AM Loop Antenna
FM Antenna
Adapter
Notes:
• To switch to Tuner mode,
press the Tuner button on the
remote control, or the FM/AM
button on the front panel.
• For Tuner operations, see page
60.