Filter
Top Products
9
Operator’s Guide
3M
™
Super Close Projection System SCP725
© 3M 2011. All Rights Reserved.
ENGLISH
Safety Information
Please read, understand, and follow all safety information contained in these instructions prior to the use of this
projector. Retain these instructions for future reference.
Intended Use
Before operating the machine, please read the entire manual thoroughly. This product was designed, built and
tested for use indoors, using 3M lamps and hardware. The use of other replacement lamps, outdoor operation or
different voltages has not been tested and could damage the projector or peripheral equipment and/or create a
potentially unsafe operating condition.
This projector is designed to operate in a normal office/classroom environment.
Altitude Temperature Humidity
0-4000 ft (normal fan speed) 5°C - 35°C (41°F - 95°F) 25% to 80%
(non-condensing)
4000-6000 ft (high fan speed) 5°C - 35°C (41°F - 95°F)
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can
affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Explanation of Signal Words and Symbols in Safety Labels and Instructions
WARNING:
Indicates a potentially hazardous situation, which if not avoided, could
result in death or serious injury and/or property damage.
CAUTION:
Indicates a potentially hazardous situation, which if not avoided, may
result in minor or moderate injury and/or property damage.
Warning: Hazardous Voltage
Warning: Hot Surface – High Temperature Lamp
Warning: High Pressure
Attention: Read Accompanying Documentation