3M SCP725 Home Theater System User Manual


 
24
Operator’s Guide
3M
Super Close Projection System SCP725
© 3M 2011. All Rights Reserved.
ENGLISH
Picture Menu
The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.
Picture Input Source: Computer 1
Picture Mode Enhanced Photo
Brightness 50 |·······················|
05 tsartnoC |·······················|
Color 50 |·······················|
Hue 0 |·······················|
Sharpness 0 |·······················|
Video Noise Reduction On
Aspect Ratio Full Screen
Advanced
Reset
Feature Description Range Default
Picture Mode
Select the best mode to optimize the
projector image.
1. Max Brightness
2. Enhanced Photo
3. Enhanced
4. Photo
N/A
VGA-Max Brightness
Video-Enhanced Photo
Brightness
Adjust brightness (low to high) of
displayed image
0–100 50
Contrast
Adjust the contrast (dark to light) in the
displayed image
0–100 50
Color *
(see note)
Adjust the intensity of color in the
displayed image
0–100 50
Hue *
(see note)
Adjust the balance of red (-) to green (+)
for video signals.
-15–+15 0
Sharpness
Adjust the displayed image to look sharper
or softer
-15–+15 0
Video Noise Reduction Turn noise reduction ON or OFF N/A Off
Aspect Ratio
Set aspect ratio to: [Full Screen or 16:9 or
Native]
N/A Full Screen
Advanced
Navigate to the Advanced picture setting
menu. This option is for Computer/
Component input and only displays when
the I/O Module is connected.
N/A N/A
Reset Reset values in this menu only N/A N/A
* Note: Tint/Hue can only be adjusted for S-Video and RCA video input signals