Caring For Your Range
Burn and Electrical Shock Hazard
Make sure all controls are off and the range
is cool before cleaning. Failure to do so can
result in burns or electrical shock.
Control panel and knobs
1.
2.
3.
4.
5.
Turn control knobs to the OFF position.
Pull control knobs straight off.
Use warm soapy water or spray glass cleaner
and a soft cloth to wipe the control panel. Rinse
and wipe dry with a soft cloth.
Wash control knobs in warm soapy water.
Rinse well and dry with a soft cloth. Do not
soak.
Replace control knobs by pushing them firmly
into place.
NOTE:
When cleaning, never use steel wool,
abrasives, or commercial oven cleaners which
may damage the finish. After cleaning, make sure
all control knobs point to the OFF position.
Surface units and reflector
bowls
Removing
Burn and Electrical Shock Hazard
Make sure all surface units are OFF before
removing surface units and reflector bowls.
Failure to do so can result in burns or
electrical shock.
1. Lift the edge of the unit opposite the receptacle,
just enough to clear the reflector bowl and trim
ring.
2. Pull the surface unit straight away from the
receptacle.
17
