A SERVICE OF

logo

02_ContInstallPortsLPR&RAW.fm Modified: 8/7/02
Template Version 1.0
GL-1020 Operator’s Guide (Basic) 57
ENABLING LPR/LPD PRINTING
To support LPR printing, the workstation must have Microsoft
TCP/IP Printing Services software installed. Otherwise, you will
not be able to add an LPR port.
Adding an LPR Port
To set up an LPR port and map it to the GL-1020 controller, use
the Add Port procedure:
1 From the Start menu, choose
Settings > Printers.
Printer settings window
2 Right-click the printer for which you want to add or
reconfigure port settings.
3 Choose
Properties from the short-cut menu.