07_ContFAQ.fm Modified: 8/7/02
Template Version 1.0
28 GL-1020 Operator’s Guide (Basic)
FREQUENTLY ASKED QUESTIONS
This section provides answers to questions about performing
various tasks.
How Do I Run GL-DocMon?
Once you have installed the client application, GL-DocMon, it
starts automatically when you launch the Windows
®
operating
system. You will see the icon in the taskbar at the bottom-right
corner of your screen.
If you have previously exited the application, you must restart it
from the Start menu: select
Programs > Toshiba GL-Client Software >
GL-DocMon.
How Do I Enable/DisableGL-DocMon?
Right-click the GL-DocMon taskbar icon. Choose
Enable or
Disable from the shortcut menu, as applicable.
How Do I Monitor Print Jobs?
Right-click the GL-DocMon taskbar icon. You will see a list of
all the GL-1020 printer drivers you have installed. Select the one
to which you submitted the job and select GL-DocMon. The
tabbed dialog box that opens displays both device and job status
information.
How Do I Reboot the GL-1020?
It is sometimes necessary to reboot the controller before new
settings can take effect. At other times, you may need to reboot
the controller to synchronize communication with the copier
again. If possible, avoid rebooting the controller by physically
resetting it.
The preferred way to reboot is as follows:
1Press
PRINTER/NETWORK.
2Press the
PRINT tab.
