![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/f6/3f63cb34-ac60-4a80-9eda-1a4449b013a4/3f63cb34-ac60-4a80-9eda-1a4449b013a4-bgcb.png)
Changing Your Settings 198
Tethering
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note:
You can not mount your phone’s microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to:
http://www.samsung.com/us/support/
downloads.
ᮣ
Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
Tethering and portable hotspot
.
For more information, refer to “Tethering” on page 187.
Mobile AP
This feature allows you to turn your phone into a Wi-Fi hotspot.
The feature works best when used in conjunction with HSPA+
(4G) data services (although 3G service can also be used).
Important!:
The Mobile AP service can not be active at the same time as
Wi-Fi. Please close your Wi-Fi connection prior to launching the
Mobile AP service.
For more information, refer to “Portable Wi-Fi Hotspot” on
page 188.
VPN settings
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!:
Before you can use a VPN you must establish and configure one.
Adding a VPN
Before you add a VPN you must determine which VPN protocol to
use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2
Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based
L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).
1. Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
VPN settings
.
2. Tap
Add VPN
.
To establish a PPTP (Point-to-Point Tunneling Protocol):
1. Establish a VPN name (a name for this connection).
2. Set the VPN server.
3. Enable encryption (if desired).
4. Set the DNS search domains.