197
Activating the Device Name
1. Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
Bluetooth settings
➔
Device name
.
The assigned device name displays.
2. Press to erase the current device name and enter a
new name for this device using the keyboard.
3. Tap
OK
to confirm your setting.
Activating Visibility
ᮣ
Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
Bluetooth settings
➔
Visible
.
The phone is now activated for discovery other devices for
a period of time determined by the value set within the
Visible time-out menu.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
Bluetooth settings
➔
Scan for devices
. Your phone begins scanning and lists any
discovered devices in the Bluetooth devices section.
2. Tap a device name to pair with the device.
Important!:
Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
tap
OK
.
USB Utilities
1. Press ➔ and then tap (
Settings
) ➔
USB
utilities
➔
Connect storage to PC
.
2. If prompted, tap
OK
to turn USB debugging mode off.
3. Plug in a compatible USB cable to begin using the device
for mass storage mode.
