115
S e t t i n g s
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter the
SIM lock code.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
The FDN(Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Disable: you can phone any number.
N o t e : Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, refer to menu option 5-3-7
below.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
N o t e : Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
LCD Contrast Menu 5-4
The LCD contrast menu enables you to adjust the
contrast of the main LCD screen.
Press to increase or to decrease the
contrast.
114
S e t t i n g s
09-A288-Settings 2/8/01 11:01 AM Page 114
