26
Section 2
Power Save mode
Unless the Backlight-Power save setting for the Liquid
Crystal Display (LCD) has been changed, Power save is
set to Off and the backlight changes from bright to dim
after a minute of inactivity, and after another minute of
inactivity, turns off. With Power save set to On, the
backlight is always dim. After approximately one
minute of inactivity, Power save turns the backlight off.
To set Power save, do the following:
1. In standby mode, press the Menu (left) soft key ( ),
then press for Display, (for Backlight), and
for Power save. The following options appear in the
display:
ⅷ Off
ⅷ On
2. Use the navigation keys to highlight On or Off, then press
the key.
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Call Answer. The following call answer options
appear in the display:
ⅷ Send Key—Only pressing answers a call.
ⅷ Folder Open—Opening the phone’s folder or pressing
answers a call.
ⅷ Any Key—Pressing any key except answers a call.
