C2674M-C (7/09) 19
Remote Control
Figure 6. Remote Control
.
ì
POWER:
• Turns on the unit.
• If the DVR is turned on but a user is not logged on, the message “You have to login first” appears.
• If a user is already logged on, the message “Please enter the password” appears. If there is no activity for a period of time,
the dialog box disappears.
î
Channel Selection:
• MAIN: Displays the Selecting Starting Channel dialog box, to select the window presentation as viewed on the VGA or
main analog monitor. Use in conjunction with buttons 1–8 or 1–16 to configure the first camera input displayed on the VGA
or main analog (MAIN-OUT BNC) monitor. This button performs the same function as the MAIN icon on the GUI toolbar.
• SPOT: Displays the Selecting Starting Channel dialog box, to select the window presentation as viewed on a spot monitor.
Use in conjunction with buttons 1–8 or 1–16 to configure the first camera input is displayed. This button performs the same
function as Login icon on the GUI toolbar.
ï
LOGIN: Displays the login dialog box if a user is not logged on to the system. If a user is logged on, pressing this button logs the
user out. When a user is logged on, the button is lit blue; if a user is not logged on, the button is not lit. This button performs the
same function as the person icon on the GUI toolbar.
ñ
ALM.OFF: Turns off an active alarm for the selected camera. Also cancels alarm activation and returns the system to the
condition before the alarm was activated.
ó
MENU/ESC: Toggles on and off the display of the setup menu.
