Radio PC Card Configuration 39
E-EQ-MX2RG-L-ARC MX2 Reference Guide
Symbol Parameters
The following is a list of parameters that can be modified in the NET.CFG file. To set the TCP/IP
parameters see the SOCKET.CFG file documentation.
Link Support
Parameter used to define resources for the LSL.COM file. Any modifications may cause resource
conflicts.
Protocol
Instructs TCP/IP stack to bind to radio driver.
ESS_ID
Identifies the 802.11B wireless network the station will connect to. The ESS_ID is a string of 1 to
31 case sensitive characters. Spaces may be included by using quotes.
Default: “LXE”
mode
IO mode required if using card and socket services.
Default: IO
ioaddress
Sets the I/O address location.
Default: 340
memory
Sets the resource memory location.
Default: C000 (2MB radio) C900 (11MB radio)
interrupt
Sets the interrupt (IRQ) line to be used.
Default: 3 (2MB radio) 5 (11MB radio)
performance_index
Configures whether the Symbol 4121 series radio will perform power management.
Valid: 0=CAM Constant Awake Mode
1=Power Management On
Default: 1
Auth_type
This parameter is used to enable and manage the 802.11 WEP encryption. The radio card will
only associate with APs that support the same Auth_type.
Valid: “Open_System” or “Shared_Key”
Default: “Open_System”
