LXE E-EQ-MX2RG-L-ARC Manual

A SERVICE OF

next previous

Handle Installation (Optional) 23

E-EQ-MX2RG-L-ARC MX2 Reference Guide

Handle Installation (Optional)

Note: The handle is standard with 48-key keypad units and optional with 38-key keypad units.

1. Battery Cover

2. Protective Diaphragm

3. Laser

4. Battery Cover Dials

5. Trigger

6. Washers

7. Screws

8. Pistol Grip

Figure 2-7 Insert Pistol Grip

To Install the Handle

1. Remove the screws located just above the battery cover’s latch dials. Remove the Pistol Grip

Cover.

2. Remove the Protective Diaphragm.

3. Insert the top tab of the Pistol-Grip Assembly into the slot at the top of the pistol grip recess.

Ensure the Pistol Grip assembly is firmly seated in the pistol grip recess.

4. Replace the screws located just above the battery cover’s latch dials.

5. Periodically check the fastenings and retighten if necessary.