LXE E-EQ-MX2RG-L-ARC Manual

A SERVICE OF

next previous

24 Hand-Strap Installation

MX2 Reference Guide E-EQ-MX2RG-L-ARC

Hand-Strap Installation

Note: The hand strap is not available with 48-key keypad units. These units include the handle

as standard equipment.

1. Hand Strap Clip

2. Hand Strap

3. Battery Cover

4. Laser

5. Battery Cover Dials

6. Pistol Grip Cover

7. Washers

8. Screws

Figure 2-8 Hand Strap Assembly

To Install the Hand Strap

1. Remove the screws located just above the battery cover’s latch dials. Remove the Pistol Grip

Cover.

2. Insert the top tab of the hand-strap cover into the slot at the top of the pistol grip recess.

Ensure the hand-strap cover is firmly seated in the recess.

3. Replace the screws located just above the battery cover’s latch dials.

4. Connect the hand-strap hook onto its connector at the base of the unit.

5. Periodically check the fastenings and retighten if necessary.