MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-55Changing Coverage Delay Options
6
Program the change(s), following the instructions for “Coverage Delays” in
the “Telephones” section of
System Programming
, Chapter 3, or the
summary programming instructions below.
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions 6
Console Procedures Change the number of rings before a call is sent to
Group Coverage receivers:
Extensions→More→More→Cover Delay→
Group Cover→Dial sender’s ext. no.→Enter→
Dial no. of rings (1–9)
Change the delay for Primary Cover buttons
programmed for Delay Ring; change the additional delay
before a call is sent to Group Coverage receivers when
Primary or Secondary Coverage Receivers are
available:
Extensions→More→More→Cover Delay→
Primary→Dial sender’s ext. no.→Enter→Dial no. of
rings (1–6)
→Enter→Exit
Change the delay for Secondary Cover buttons
programmed for Delay Ring:
Extensions→More→More→Cover Delay→
Secondary→Dial sender’s ext. no.→Enter→
Dial no. of rings (1–6)→Enter→Exit
PC Procedures Change the number of rings before a call is sent to
Group Coverage receivers:
→ → → → →Type sender’s ext.
no.
→ →Type no. of rings (1–9)→ →
Change the delay for Primary Cover buttons
programmed for Delay Ring; change the additional delay
before a call is sent to Group Coverage receivers when
Primary or Secondary Coverage Receivers are
available:
→ → → → →Type sender’s ext.
no.
→ →Type no. of rings (1–6)→ →
Change the delay for Secondary Cover buttons
programmed for Delay Ring:
→ → → → →Type sender’s ext.
no.
→ →Type no. of rings (1–6)→ →
