Examples
The examples below show how to enter telephone numbers for an Allowed
Phone Number List in Step 4 of “Programming.” When an Allowed List is
assigned to an extension, users can dial numbers on that list, even if the
numbers would otherwise be restricted.
■
■
Specific Telephone Numbers. Enter the phone number exactly as you
would dial it. For example, to allow calls to the number 201 555-1111, make
the following entries:
–
Toll Call Prefix required
12015551111
—
Toll Call Prefix not required
2015551111
All Telephone Numbers in One Area Code. The following list entries allow
calls to the 800 area code:
–
Toll Call Prefix required
1800
–
Toll Call Prefix not required
800
Programming
To create a list of Allowed Phone Numbers:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
4
] [
0
] [
7
].
2. At the List Number: prompt, enter a list number (1–4). For exampIe, to
select list 1, press [
1
].
3.
At the
Entry:
prompt, select a list entry (01–1 0). For example, to select the
first entry, press [
0
] [
1
].
4.
At the Data------------ prompt, enter the first telephone number.
5.
To save the telephone number in memory,
you must press [
Enter
].
6.
At this point:
■
■
■
■
To change the phone number you just entered, press [
Remove
] and
repeat Steps 4 and 5.
To delete the phone number you just entered, press [
Remove
].
To enter other phone numbers in this list, press [
Next Item
] and repeat
Steps 4 and 5.
To create another list, press [
Next Procedure
] [
Prev Procedure
] and go to Step 2.
7.
Select another procedure using [
Next Procedure
] or [
Prev Procedure
] or exit
programming mode.
5-10
Allowed Phone Number Lists (#407)
