Use the HP Embedded Web Server (wireless models
only)
Use the HP Embedded Web Server (EWS) to view product and network status and to manage printing
functions from a computer.
●
View product status information
●
Determine the remaining life on all supplies and order new ones
●
View and change the product default configuration settings
●
View and change network configuration
You do not need to install any software on the computer. You only need to use one of these supported
Web browsers:
●
Internet Explorer 6.0 (and later)
●
Firefox 1.0 (and later)
●
Mozilla 1.6 (and later)
●
Opera 7.0 (and later)
●
Safari 1.2 (and later)
●
Konqueror 3.2 (and later)
The HP Embedded Web Server works when the product is connected to a TCP/IP-based network. The
HP Embedded Web Server does not support IPX-based connections or direct USB connections.
NOTE: You do not have to have Internet access to open and use the HP Embedded Web Server.
However, if you click a link on any of the pages, you must have Internet access to go to the site
associated with the link.
Open the HP Embedded Web Server by using a network
connection
To open the HP Embedded Web Server, type the IP address or host name of the product in the address
field of a supported Web browser. To find the IP address, print a configuration page at the product by
pressing and holding the cancel
button when the ready light is on and no other jobs are printing.
Hold the button until the ready
light starts blinking.
TIP: After you open the URL, bookmark it so that you can return to it quickly in the future.
ENWW
Use the HP Embedded Web Server (wireless models only)
57
