xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
271
show authen_enable
Purpose Used to display the method list of authentication methods for promoting normal user level
privileges to Administrator level privileges on the Switch.
Syntax
show authen_enable [default | method_list_name <string 15> | all]
Description This command is used to delete a user–defined method list of authentication methods for
promoting user level privileges to Administrator level privileges.
Parameters default – Entering this parameter will display the default method list for users attempting
to gain access to Administrator level privileges on the Switch.
method_list_name <string 15> – Enter an alphanumeric string of up to 15 characters to
define the given method list to view.
all – Entering this parameter will display all the authentication login methods currently
configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured method list name.
Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges from
1(highest) to 4 (lowest).
Method Name – Defines which security protocols are implemented, per method
list name.
Comment – Defines the type of Method. User–defined Group refers to server
groups defined by the user. Built–in Group refers to the TACACS, XTACACS,
TACACS+ and RADIUS security protocols which are permanently set in the
Switch. Keyword refers to authentication using a technique INSTEAD of
TACACS/XTACACS/TACACS+/RADIUS which are local (authentication through
the local_enable password on the Switch) and none (no authentication
necessary to access any function on the Switch).
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DGS–3426:5#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
---------------- -------- ----------- -------------------
Permit 1 tacacs+ Built–in Group
2 tacacs Built–in Group
3 ctsnow User
–
defined Group
4 local Keyword
default 1 tacacs+ Built–in Group
2 local Keyword
Total Entries : 2
DGS–3426:5#
