xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
154
DGS–3426:5#enable ipif s2
Command: enable ipif s2
Success.
DGS–3426:5#
disable ipif
Purpose Used to disable the configuration of an IP interface on the Switch.
Syntax
disable ipif {<ipif_name 12> | all}
Description This command is used to disable an IP interface on the Switch, without altering its
configuration values.
Parameters
<ipif_name 12> − The name previously created to define the IP interface.
all – Entering this parameter will disable all the IP interfaces currently configured on the
Switch.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the IP interface named “s2”:
DGS–3426:5#disable ipif s2
Command: disable ipif s2
Success.
DGS–3426:5#
delete ipif
Purpose Used to delete the configuration of an IP interface on the Switch.
Syntax
delete ipif {<ipif_name 12> | all}
Description This command will delete the configuration of an IP interface on the Switch.
Parameters
<ipif_name 12> − The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces currently configured on the
Switch.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the IP interface named s2:
DGS–3426:5#delete ipif s2
Command: delete ipif s2
Success.
DGS–3426:5#
