CLI Commands B-25
set date <date> Sets the system date, and leaves the time unchanged. Use show date to see what
the current settings are. The format is: dd-mmm-yyyy. The month should be the
first three characters of the month name. The year can be either 2 or 4 digits (97
or 1997).
set dhcp mode <mode> Sets the DHCP mode for the unit.
set dhcp relay server1 address <IP_address>
enabled [YES | NO]
max_hops <number>
Defines the address and characteristics of the primary DHCP Server over the WAN
that should receive our relayed DHCP requests.
set dhcp relay server2 address <IP_address>
enabled [YES | NO]
max_hops <number>
Defines the address and characteristics of the secondary DHCP Server over the
WAN that should receive our relayed DHCP requests.
prompt <string> Sets the global command prompt for the CLI. Use show command
to see the currently defined prompt. Limit: 64 characters.
local_prompt <string> Sets a separate prompt for a command file process. Limit: 64
characters.
Parameter Description
mode DHCP functionality you wish to enable for this unit. Currently available
services are:
DISABLED - disables all DHCP services.
RELAY - enables the DHCP Relay service.
SERVER - enables the DHCP Server within the unit.
Parameter Description
address IP address of the primary DHCP server over the WAN port where DHCP
resolution requests should be forwarded.
enabled Whether or not this server is active for relay.
max_hops maximum number of hops the redirected requests are allowed to accrue
without the request being dropped.
Parameter Description
address IP address of the secondary DHCP server over the WAN port where DHCP
resolution requests should be forwarded.
enabled Whether or not this server is active for relay.
max_hops maximum number of hops the redirected requests are allowed to accrue
without the request being dropped.
