Disable Bridge-port
6-27
The attributes of port #1 of bridge #0 are displayed as follows:
Figure 6-10 Bridge-port STP Attributes Display.
Disable Bridge-port
Disable and enable a bridge-port for a specified bridge for management.
Example
Enter:
[3] [4] [3] [4] 0 1 D
Disables bridge-port 1 on bridge 0.
Update Bridge-port
STP parameters
Update bridge-port STP parameters: bridge-port-priority and
bridge-path-cost (see “Management Bridge Parameters” on page 11-8
for more information about the STP parameters).
Update Bridge-port-
priority
Update the STP parameter bridge-port-priority for a specified bridge.
bridge #0 port #1 STP Attributes:
====================================
Bridge-port Priority= 128
Bridge-port State= forwarding
Bridge-port Path Cost= 100
Bridge-port Designated Root= 800000c0da1800a0
Bridge-port Designated Cost= 0
Bridge-port Designated Bridge= 800000c0da1800a0
Bridge-port Designated port= 8001
Bridge-port Forward Transitions= 1
Table 6-37 Task Actions
Menu
Sequence
Enter Result
[3] bridge
[4] stp
[3] port
[4] status
1
Bridge number {0-3}
2
Bridge-port Number {1-5}
3
D(isable)/E(nable)
(D)isables or (e)nables this
bridge-port for management.
abtthgde.book Page 27 Tuesday, June 23, 1998 10:29 AM
