Display Current LEC Configuration
8-5
Example
Enter:
[5] [2] [1] 0
The following LEC configuration and status for the bridge #0 are
displayed.
Figure 8-2 LEC Configuration and Status Display
Control Direct VCC VPI/VCI values of the control-direct VCC from the LEC
to the LES.
Control Distribute VCC VPI/VCI values of the control-distribute VCC from the
LES to the LEC.
BUS Information Description
ATM Address ATM address of the BUS.
Multicast Send VCC VPI/VCI values of the multicast-send VCC from the LEC
to the BUS.
Multicast Forward VCC VPI/VCI values of the multicast-forward VCC from the
BUS to the LEC.
Table 8-4 LEC Configuration and Status Information (continued)
----------------------------------------------------------------
| LECS via ILMI mode is : Disabled
| LECS info :
| ATM address: not valid
| Config VCC (VPI/VCI) : not valid
+-------------------------------------------------------------+
| LES info :
| ELAN name : elan0_0 lec id : 6
| ATM address: 4700000009000000000000000000c0da60000000
| Control Direct VCC (VPI/VCI) : 0 / 40
| Control Distribute VCC(VPI/VCI) : 0 / 36
+-------------------------------------------------------------+
| BUS info :
| ATM address: 4700000009000000000000000000c0da60000000
| Multicast Send VCC (VPI/VCI) : 0 / 41
| Multicast Forward VCC (VPI/VCI) : 0 / 37
----------------------------------------------------------------
abtthgde.book Page 5 Tuesday, June 23, 1998 10:29 AM
