Filter
Top Products
33 En
PREPARATIONINTRODUCTION APPENDIXSETTINGS
Customizing this unit
(SET MENU)
System
configurations
(ADVANCED SETUP)
Using an external
amplifier
Controlling external
components
PLAYBACK FEATURES
Playback
Playback mode
FM tuning
SIRIUS Satellite
Radio™ tuning
Playing back iPod™
Useful features
SETTINGS
You can manually configure various settings for this unit in “SET MENU”.
Customizing this unit (SET MENU)
SET MENU items
Menu Sub menu Features Page
MEMORY LOAD Loads the beam and sound settings saved in the
memory.
19
SAVE Saves the current beam and sound settings to the
memory.
19
AUTO SETUP BEAM+SOUND OPTIMZ Optimizes the beam and sound settings
automatically.
16
BEAM OPTIMZ ONLY Optimizes the beam settings automatically. 16
SOUND OPTIMZ ONLY Optimizes the sound settings automatically. 16
MANUAL SETUP SETTING PARAMETERS Adjusts the listening room and listening position
settings.
34
BEAM ADJUSTMENT Adjusts the various sound beam settings. 35
IMAGE LOCATION Adjusts the sound position of the front right and left
channels.
35
SOUND SET MENU TONE CONTROL Adjusts the output level of high-frequency or low-
frequency sound.
36
SUBWOOFER SET Configures the subwoofer settings. 36
AUDIO DELAY Adjusts delay in output timing between video signals
and audio signals.
36
DRC:Dynamic Range Control Adjusts the dynamic range. 37
BASS EXTENSION Selects the bass sound extension. 37
MUSIC ENHANCER Selects the compressed audio enhancer. 37
CHANNEL LEVEL Adjusts the volume of each channel. 37
SOUND OUT MENU SOUND BEAM OUT CONFIG Configures the sound beam output settings. 37
SOUND OUT Configures the audio signal output settings. 37
INPUT MENU INPUT ASSIGNMENT Assigns jacks according to the component to be used. 38
INPUT RENAME Renames the displayed input source. 38
HDMI SETUP Configures the HDMI settings. 39
WIRELESS SETUP Configures the wireless settings. 39
DISPLAY MENU F. DISPLAY SETUP Configures the front panel display settings. 39
OSD SETUP Configures the OSD settings. 40
LANGUAGE SETUP Changes the language used in the OSD. 40
UNIT SETUP Changes the display unit of measurement. 40