Filter
Top Products
23
English
INTRODUCTION
PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
4 Set PARAMETER/SET
MENU on the remote
control to PARAMETER.
Using the Test Tone (TEST DOLBY
SUR.)
Use the test tone to balance the output levels of the 6
speakers required for a surround sound system. The
adjustment of each speaker output level should be made at
your listening position with the remote control.
1 Press TEST to output the
test tone.
2 Adjust the volume so you can hear the test
tone.
The test tone is heard from the left main speaker,
center speaker, right main speaker, right rear speaker,
rear center speaker and left rear speaker in order. The
tone is produced for 2.5 seconds each time.
This section explains how to adjust the speaker output
levels by using the test tone generator. When this
adjustment is made, the output level heard at the listening
position will be the same from each speaker. This is
important for the best performance of the digital sound
field processor, and various decoders (Dolby Digital,
Dolby Pro Logic, Dolby Pro Logic
, DTS, DTS ES, and
DTS Neo: 6).
Note
• Since this unit cannot enter the test mode while headphones are
connected to this unit, be sure to unplug the headphones from
the PHONES jack when using the test tone.
Before You Begin
1 Turn on the video monitor connected to this
unit.
2 Press SPEAKERS A or B
to select the main
speakers to be used.
If you are using two sets of the
main speakers, press both A
and B.
3 Set the BASS and TREBLE controls on the
front panel to the center position and turn off
BASS EXTENSION and PROCESSOR
DIRECT by pressing the buttons.
“BASS EXT. OFF” and “P. DIRECT OFF” appear
on the front panel display.
TEST
BASS
–
+
TREBLE
–
+
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
A/B/C/D/E
2
31, 4
BASS
EXTENSION
PROCESSOR
DIRECT
SPEAKERS
AB
ADJUSTING THE SPEAKER OUTPUT LEVELS
Set to OFF.
BASS
VOLUMEINPUT
INPUT M0DE
VIDEO AUXSILENT
PROGRAM
STEREO
SPEAKERS
BASS
EXTENSION
PROCESSOR
DIRECT
PRESET
/
TUNING
PHONES
EFFECT
A/B/C/D/E
S VIDEO
MEMORY
FM/AM
EDIT
PRESET
/TUNING
MAN'L/AUTO FMAUTO/MAN'L MONO
TUNING
MODE
VIDEO AUDIO OPTICALLR
NATURAL SOUND AV RECEIVER
6CH INPUT
– +
TREBLE
– +
PRO LOGIC
AB
REC OUT/ZONE 2
V-AUX
VCR2
/DVR
VCR1
PHONO
CD
TUNER
MD/TAPE
DVD
SOURCE
/REMOTE
D-TV/LD
CBL/SAT
CD-R
DIGITAL
STANDBY
/
ON
2
BASS
VOLUMEINPUT
INPUT M0DE
VIDEO AUXSILENT
PROGRAM
STEREO
SPEAKERS
BASS
EXTENSION
PROCESSOR
DIRECT
PRESET
/
TUNING
PHONES
EFFECT
A/B/C/D/E
S VIDEO
MEMORY
FM/AM
EDIT
PRESET
/TUNING
MAN'L/AUTO FMAUTO/MAN'L MONO
TUNING
MODE
VIDEO AUDIO OPTICALLR
NATURAL SOUND AV RECEIVER
6CH INPUT
– +
TREBLE
– +
PRO LOGIC
AB
REC OUT/ZONE 2
V-AUX
VCR2
/DVR
VCR1
PHONO
CD
TUNER
MD/TAPE
DVD
SOURCE
/REMOTE
D-TV/LD
CBL/SAT
CD-R
DIGITAL
STANDBY
/
ON
2
33
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
A/B/C/D/E
4
PARAMETER
SET MENU
VOLUME
VOLUME
Front panel
or
Remote control
0104V2200_19-24_EN(U) 01.8.1, 9:43 AM23