Filter
Top Products
43 En
Operating various settings for this unit (Setup menu)
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
■ OSD Shift
Adjusts top and bottom positions of the screen displayed
on the video monitor. To move up the screen, set this value
larger. To move down the screen, set it smaller.
You can set items for volumes.
■
Adaptive DRC
Adjust the dynamic range in conjunction with the volume
level. This feature is useful when you are listening at
lower volumes or at night. When this function is enabled,
the dynamic range is adjusted as follows.
If the VOLUME setting is low:
the dynamic range is narrow
If the VOLUME setting is high:
the dynamic range is wide
y
• The Adaptive DRC setting is effective for headphones.
■ Max Volume
Sets the maximum volume level so that the volume will
not be accidentally increased. For example, you can adjust
the volume between –80.0 dB and –5.0 dB when you set
this parameter to “–5.0dB.” The volume increases to the
maximum level when this parameter is set to +16.5 dB
(default).
■ Init. Volume
Sets the volume at the time this unit is turned on. When
this parameter is set to “Off,” the volume is set to a level
that last time this unit is set to standby.
Note
• When you set “Max Volume” and “Init. Volume,” the setting of “Max
Volume” becomes effective. For example, when you set “Max Volume”
to “–30.0dB” and “Init. Volume” to “0.0dB,” the volume is
automatically set to “–30.0dB” at the next time this unit is turned on.
Changes input source names to be displayed on the front
panel display.
You can select an input source that you want to change the
name to be displayed using nCursor.
Selecting a name to be displayed from templates
Select an input source that you want to change the name,
and select a name from the following templates using
Cursor.
Entering an original name
Select an input source that you want to name, and press
nENTER. You can enter up to 9 characters by selecting
one character at a time with the following keys according
to the following operation.
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
You can set parameters for the sound field programs. For
details, see page 36.
Protects settings of setup menu against accidental
alteration.
Note
• When this parameter is switched to “On,” “G” appears while the setup
menu is displayed on the video monitor.
Adjustable range: -5 to 0* to +5
3 Volume
Choices: Auto/Off*
Auto Adjusts the dynamic range automatically.
Off Not adjust the dynamic range automatically.
Adjustable range: -30.0dB to +15.0dB/+16.5dB* (5.0 dB
step)
Choices: Off*/Mute/-80.0dB to +16.5dB (0.5 dB step)
VOLUME: highVOLUME: low
Input levelInput level
Output level
Output level
Auto
Off Off
Auto
4 Input Rename
– Blu-ray –Satellite
– DVD –VCR
– SetTopBox – Tape
– Game –MD
– TV – PC
– DVR – iPod
– CD –HD DVD
– CD-R –“blank”
nCursor l / h For selecting characters that you
want to change
nCursor k / n For selecting characters to be
entered
nENTER For entering the selected characters
DSP Parameter
Memory Guard
Choices: Off*/On
Off Not protect settings.
On Protects the settings of the setup menu
(except for the Memory Guard setting).