Filter
Top Products
33 En
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
ADVANCED OPERATION
This unit has an OPTION menu of frequently used menu items for input sources compatible with this unit. The procedure
for setting the OPTION menu items is described below.
1 Select an input source using NINPUT l / h
(gInput selection keys).
2 Press mOPTION on the remote control.
The OPTION menu appears. The displayed OPTION
menu items differ depending on the input source. For
details, see the following section.
3 Select the desired menu item using
nCursor k / n, and press nENTER.
Parameters of the selected menu item are displayed.
4 Change the setting of the selected menu item
(or enable a function) using nCursor k / n /
l / h and nENTER.
Details of the selected menu item are displayed.
Parameters you can set differ depending on the menu
items.
5 To close the OPTION menu, press
mOPTION.
You can also use nRETURN to return to the
previous screen or close the OPTION menu.
y
• When nCursor or other keys do not work after completing the
menu, select the input source again using gInput selection
keys.
The following menu items are provided for each input
source.
Details of the menu items are as follows:
y
• The default settings are marked with “*.”
■ Volume Trim
Reduces any change in volume when switching input
sources by correcting volume differences between input
sources.
You can set this parameter for each input source.
Setting the option menu for each input source (OPTION menu)
HDMI1OPTION
DecoderMode
.VolumeTrim
[ENTER]:Select
ExtendedSurround
SignalInfo
[]/[]:Up/Down
[
[
OPTION menu items
Input
Source
Menu item
HDMI1-4 Volume
Trim
Decoder
Mode
Extended
Surround
Signal Info
AV1-4 Volume
Trim
Decoder
Mode
Extended
Surround
Signal Info
AV5-6 Volume
Trim
AUDIO1-2 Volume
Trim
V-AUX Volume
Trim
TUNER Volume
Trim
FM Mode Auto
Preset
Clear
Preset
iPod
(DOCK)
Vo l u m e
Trim
Shuffle Repeat
Bluetooth
(DOCK)
Vo l u m e
Trim
Connect/
Disconnect
Pairing
Input source: All
Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB
(in 0.5 dB steps)