Filter
Top Products
23 En
Playback
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
When HDMI1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
y
• Input signal information is displayed on both a video monitor and the
front panel display.
• Information on the input signal is also displayed on the front panel
display. You can select the desired item using nCursor k / n.
1 Select the desired input source, and press
mOPTION.
The option menu for the selected input source is
displayed (see page 33).
2 Press nCursor k / n to select “Signal Info,”
and press nENTER.
Information on input signals is displayed. See
page 34 on messages displayed on the screen.
Notes
• If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
• Information on the input signal is also displayed on the front panel
display. You can select the desired item using nCursor k / n.
3 To end the information display, press
mOPTION.
Information displayed on the front panel display can be
changed by pressing CINFO (or iINFO).
The following information can be displayed according to
the input source.
For example, if you select HDMI1 input and display “DSP
Program,” the following screen appears on the front panel
display.
Displaying input signal information Changing information on the front
panel display
HDMI1-4: Input, DSP Program, Audio Decoder
AV1-6: Input, DSP Program, Audio Decoder
AUDIO1-2: Input, DSP Program, Audio Decoder
V-AUX: Input, DSP Program, Audio Decoder
FM/AM: Frequency, DSP Program, Audio
Decoder
iPod (Simple remote mode): Input, DSP Program, Audio Decoder
iPod (Menu browse mode): (in PlayInfo displayed) Artist, Album,
Song, DSP Program, Audio Decoder
(in Play menu displayed) List
Bluetooth: Input, DSP Program, Audio Decoder
Straight
Input source
Sound field program (DSP program)