Filter
Top Products
1 Tune to a desired station.
(Refer to pages 7–8 for tuning procedure.)
2 Select a desired page (A – E) of preset station buttons
while watching the display.
3
4 Press a preset station button before “MEMORY”
goes off from the display.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
buttons on other pages in the same way by selecting
other pages in step 2.
11 Select the page of preset station buttons.
22
Select the desired preset station button.
Notes
●
A new setting can be programmed in place of the former
one.
●
For FM reception, the settings of the MODE, BLEND and
IF MODE buttons are stored along with the station
frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet for more than
1 year.
For using an external timer
When making timer setting by using an external timer, store
the station to be called onto A1, and be sure to turn the power
off while the preset station on A1 is being called.
9
English
MANUAL PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using the preset station buttons. With this function, you can
select any desired station by only pressing the corresponding preset station button. Up to 40 stations (8 stations x 5 pages) can be
stored.
PRESET TUNING
To store stations
To recall a preset station
3
2, 11 4, 22 (Preset station buttons)
A/B/C/D/E
FM
MEMORY
MAN’L/AUTO FM
FM
MEMORY
A/B/C/D/E
FM
Flashes on and off
for about 5 seconds.
A/B/C/D/E 1 2345678
PRESET STATIONS
A/B/C/D/E 1 2345678
PRESET STATIONS
FM MHz
WIDE
AUTO TUNING
0 10050
STEREO
Shows the displayed station has been
programmed to A1.