Filter
Top Products
18
REMOTE CONTROL TRANSMITTER
(separate purchase)
Functions
Battery installation
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
●
Use only AA, R6, UM-3 batteries for replacement.
●
Be sure the polarities are correct. (See the illustration
inside the battery compartment.)
●
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
●
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact
with clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.
Remote control transmitter operation range
Notes
●
There should be no large obstacles between the remote
control transmitter and the main unit.
●
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid
direct lighting.
PRESET
A/B/C/D/E
123
456
78
YAMAHA
REMOTE
CONTROL
TRANSMITTER
30°
30°
A/B/C/D/E
Selects a desired page (A–E) of the preset
station buttons.
(Refer to “PRESET TUNING” on page 9.)
Preset station buttons
Used to store stations or recall stored stations.
(Refer to “PRESET TUNING” on page 9.)
Remote control
sensor
Within approximately
6 m (19.7 feet)