Yamaha RX-V730 Stereo Receiver User Manual


 
Check your package to make sure it contains the following items.
Remote control
0000
0000
0000
[] Qr_
Fq r=n r=n r=n
rqn rqn E23EE3
_M
Batteries (4)
(AAA, R03, ua-4)
Front VIDEO AUX jack cap
75-ohm/300-ohm antenna
adapter (U.K. model)
AM loop antenna
Indoor FM antenna
(U.S.A., Canada, China,
Korea and General models)
(Europe, U.K., Australia and
Singapore models)
Notes on batteries
Insert the batteries in the correct direction by aligning the
+ and - marks on the batteries with the polarity markings
(+ and -) inside the battery compartment.
° Change all of the batteries if you notice a decrease in
the operating range of the remote control, that the
indicator does not flash, or the light becoming dim.
° Do not use old batteries together with new ones.
° Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have
the same shape and color.
° If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean
the battery compartment thoroughly before installing
new batteries.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the manufacturer code and program
any acquired functions that may have been cleared.
[] Press the _ part and slide off the battery
compartment cover.
[] Insert the four supplied batteries (AAA, R03,
UM-4) according to the polarity markings on
the inside of the battery compartment.
Slide the cover back on so that it snaps into
place.
3