Filter
Top Products
• For movie programs: No. 7 to 9
This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
Table of Program Names for Each Input Format
put 2 channel 5.1 channel 6.1 channel *
Stereo DOLBY DIGITAL DTS DOLBY DIGITAL DTS-ES
No. Program _ EX compatible
7 MOVIE 70 mm Spectacle DGTL Spectacle DTS Spectacle Spectacle EX Spectacle ES
THEATER 1
70 mm Sci-Fi DGTL Sci-Fi DTS Sci-Fi Sci-Fi EX Sci-Fi ES
8 MOVIE 70 mm Adventure DGTL Adventure DTS Adventure Adventure EX Adventure ES
THEATER 2
70 mm General DGTL General DTS General General EX General ES
9 DOLBY -- Normal -- Dolby D EX --
DIGITAL
-- Enhanced -- Enhanced EX --
DTS DIGITAL -- -- Normal -- DTS-ES
SUR
-- -- Enhanced -- Enhanced ES
PRO LOGIC Normal ....
Enhanced ....
PRO LOGIC Movie ....
1T
Music ....
* means the Dolby Digital EX decoder or the DTS-ES compatible decoder is ON.
_%-
o If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will automatically switch to
the Dolby Digital playback sound field or DTS playback sound field.
o If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the EX/ES button on the
remote control, the Dolby Digital EX or DTS-ES compatible decoder usually turns on and the corresponding DSP program is
selected.
o EX/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the rear center speaker. In this case
the program name changes to the corresponding name for 6.1 channel.
o When playing a 6.1 channel source with the Dolby Digital EX decoder or the DTS-ES compatible decoder turned off, the program
name changes to the corresponding name for 5.1 channel.
• The" _ "indicator does not light up when selecting program No. 9 except in Enhanced mode.
• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, main and rear
speakers output effect sounds.
33