Filter
Top Products
O SELECT A/V
Sets the remote to control a component other than the one
selected using the input selector buttons.
_) AMP
Switches the function of the same controls between AMP
and the component selected using the input selector
buttons.
I_) VOL +/-
Increasesor decreases the volume level.
i_) MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
I_) SET MENU
Selects the SET MENU mode.
I_1 ON SCREEN
Displays the input or operation status.
I_) STEREO/EFFECT
Switches between normal stereo and DSP effect
reproduction. When STEREO is selected, 2-channel
signals are directed to the main left and right speakers
without effect sounds and all Dolby Digital and DTS
signals (except the LFE channel) are mixed down to the
main left and fight speakers.
,gmIAVltt,{ellf,,"f_'yAVlDI,71hV[BJrI[e]AV_
i 6 m (20 feet)
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
• Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
- high humidity or temperature such as near a heater,
stove or bath;
- dusty places; or
- in places subject to extremely low temperatures.
7