Filter
Top Products
FM/AM TUNING
53 En
BASIC
OPERATION
English
You can use two tuning modes to tune into the desired FM/AM station:
Frequency tuning mode (AUTO TUNING/MANUAL TUNING)
You can search or specify the frequency of the desired FM/AM station automatically or manually (see “Basic tuning
operations” on this page).
Preset tuning mode (PRESET TUNING)
You can preset the desired FM/AM station in advance, and then recall the station by specifying the preset group and
number (see “Using station preset feature” on page 54).
Orient the connected FM and AM antennas for the best reception.
1 Rotate the
R
INPUT selector (or press
4
TUNER) to select “TUNER” as the input
source.
2 Press
C
BAND (or
7
BAND) to select the
reception band.
“FM” or “AM” appears in the front panel display.
3 Press
B
SEARCH MODE (or
M
SRCH
MODE) to select the desired tuning mode.
Automatic tuning mode (AUTO TUNING)
Use this feature when the signal from the station you
want to select is strong.
When this unit is in the automatic tuning mode,
“AUTO TUNING” appears in the front panel display
for a moment. The AUTO indicator appears in the
front panel display.
Manual tuning mode (MANUAL TUNING)
Use this feature if the signal from the station you
want to select is weak and you cannot tune by using
the automatic tuning. When this unit is in the manual
tuning mode, “MANUAL TUNING” appears in the
front panel display for a moment.
y
Manually tuning into an FM station automatically switches
the tuner to monaural reception to increase the signal
quality.
Preset tuning mode (PRESET TUNING)
Use this feature to recall the preset stations. When
this unit is in the preset tuning mode, “PRESET
TUNING” appears in the front panel display for a
moment. Frequency tuning is not possible. See
page 54 for details.
4 Press
E
PRESET/TUNING/CH l / h (or
8
PRESET/CH k / n) repeatedly to tune into
the desired station.
•Press
E
h (or
8
k) to tune into a higher
frequency.
•Press
E
l (or
8
n) to tune into a lower frequency.
FM/AM tuning
Overview
Note
Basic tuning operations
Before performing the following operations, press
4
TUNER
on the remote control.
AUTO
AFM 88.9MHz
Lights up
No colon (:)
AFM 88.9MHz
No colon (:)