Filter
Top Products
102 En
Remote control features
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
Remote control code default settings
You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above. In this case,
try setting another Yamaha remote control code.
1 While pressing and holding one of the input
selector buttons (
4
) on the remote control to
select the control area you want to set up,
press
2
AV POWER for more than 3
seconds.
5
AMP flashes twice.
2 Press the numeric buttons (0 to 9) (
G
) to
enter the four-digit remote control code for
the component to be used.
When the setting succeeds,
5
AMP flashes twice;
however, when it does not,
5
AMP flashes
repeatedly.
• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step 2, the
setup process is canceled. If this happens, repeat the setup
procedure.
■ Resetting all remote control codes
Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
1 While pressing and holding
5
AMP on the
remote control, press
2
AV POWER for
more than 3 seconds.
5
AMP flashes twice.
2 Press the numeric buttons (
6
) to enter the
code number “9981”.
When the setting succeeds,
5
AMP flashes twice;
however, when it does not,
5
AMP flashes
repeatedly.
y
If you do not press any buttons within 30 seconds after step 1, the
clearing process is canceled. In this case, repeat the clearing
procedure.
Setting remote control codes
Input
source
Component
category
Manufacturer
Default
code
A TUNER Yamaha 5012
XM TUNER Yamaha 5009
SIRIUS TUNER Yamaha 5017
CD CD Yamaha 5013
MD/CD-R CD-R Yamaha 5001
TUNER TUNER Yamaha 5007
DVD DVD Yamaha 2000
DTV/CBL — — —
V-AUX TUNER Yamaha 5011
DVR DVR Yamaha 2011
B TUNER Yamaha 5009
Note
DVD
V-AUX/DOCK
VCR B
DTV/CBL DVR
CD MD/CD-R
TUNER
A
XM SIRIUS
POWER
AV
AMP
While holding down
Press for 3
seconds
flashes
Notes
POWER
AV
AMP
Press for 3
seconds
While holding
down
AMP
flashes