Filter
Top Products
107 En
Advanced setup
ADVANCED
OPERATION
English
■ Remote control AMP ID REMOTE AMP
Use this feature to set the AMP ID of this unit for remote
control recognition. This feature is useful when you
operate this unit and the other Yamaha receivers/
amplifiers in the same room separately.
Choices: ID1, ID2
• Select “ID1” when the remote control AMP ID code is
set to “5019”.
• Select “ID2” when the remote control AMP ID code is
set to “5020”.
Setting remote control AMP ID codes
You need to set the remote control AMP ID code for the
remote control.
1 While pressing and holding
5
AMP on the
remote control, press
2
AV POWER for
more than 3 seconds.
5
AMP flashes twice.
2 Press the numeric buttons (
G
) to enter the
code number “5019” or “5020”.
When the setting succeeds,
5
AMP flashes twice;
however, when it does not,
5
AMP flashes
repeatedly.
*1
The remote control setting
*2
The setting of this unit
■ Remote control TUNER ID REMOTE TU
Use this feature to set the TUNER ID of this unit for
remote control recognition.
Choices: ID1, ID2
• Select “ID1” when the remote control TUNER ID code
is set to “5007”.
• Select “ID2” when the remote control TUNER ID code
is set to “5016”.
Setting remote control TUNER ID codes
You need to set the remote control TUNER ID library
code for the remote control.
1 While pressing and holding
4
TUNER on the
remote control, press
2
AV POWER for
more than 3 seconds.
5
AMP flashes twice.
2 Press the numeric buttons (
G
) to enter the
code number “5007” or “5016”.
When the setting succeeds,
5
AMP flashes twice;
however, when it does not,
5
AMP flashes
repeatedly.
*1
The remote control setting
*2
The setting of this unit
See page 106 for the operation of the advanced setup.
AMP ID
code *1
Function
Remote
control AMP
ID *2
5019
(initial setting)
To operate this unit using
the default code.
ID1
(initial setting)
5020
To operate this unit using
an alternative code.
ID2
POWER
AV
AMP
Press for 3
seconds
While holding
down
AMP
flashes
TUNER ID
code *1
Function
Remote
control
TUNER ID *2
5007
(initial setting)
To operate this unit using
the default code.
ID1
(initial setting)
5016
To operate this unit using
an alternative code.
ID2
POWER
AV
TUNER
Press for 3
seconds
While holding
down
AMP
flashes