Filter
Top Products
PLAYBACK ➤ Playing back music in multiple rooms (RX-V575 only) En 61
The Zone A/B function allows you to play back an input source in
the room where the unit is installed (Zone A) and in another room
(Zone B).
For example, you can turn on Zone A (turn off Zone B) when you
are in the living room, and turn on Zone B (turn off Zone A) when
you are in the study room. Also, you can turn on both zones when
you want to enjoy the same input source in those rooms
simultaneously.
• Multichannel sources are mixed down to 2 channels and output to the zone B.
• The same input source is applied to both Zone A and Zone B.
• By default, the volume for Zone B changes in conjunction with the volume for Zone
A. If there is volume difference between Zone A/B, you can correct it in “ZoneB
Trim” in the “Option” menu (p.62). Also, you can adjust the volume for Zone B
separately (p.62).
• You can automatically enable/disable the audio output to Zone A/B in conjunction
with a scene selection (p.36)
Preparing Zone B
Connect the device that will be used in Zone B to the unit.
Connect the speakers placed in Zone B to the unit with speaker
cables.
To utilize the SURROUND BACK/BI AMP/ZONE B jacks for Zone B
speakers, set “Power Amp Assign” (p.71) in the “Setup” menu to
“Zone B” after connecting the power cable to an AC wall outlet.
Playing back music in multiple rooms (RX-V575 only)
Living room (Zone A)
Study room (Zone B)
Caution
• Remove the unit’s power cable from the AC wall outlet before connecting
speakers.
• Ensure that the core wires of the speaker cable do not touch one another or
come into contact with the unit’s metal parts. Doing so may damage the unit
or the speakers. If the speaker cables short circuit, “Check SP Wires” will
appear on the front display when the unit is turned on.
12
12
39
45
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
OR OUT
P
B
Y
SPEAKERS
SUBWOOFER
PRE OUT
2
1
The unit (rear)
Zone A
Zone B