Filter
Top Products
61 En
SIRIUS Satellite Radio™ tuning
BASIC
OPERATION
English
You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
automatically skips the locked channels when this unit is
in the All Channel Search mode or Category Search mode
and you search a channel by pressing GPRESET/
TUNING/CH l / h (or 8PRESET/CH k / n).
■ Setting the code number and the locking
channels
Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked.
1 Press 7BAND.
The "PARENTAL LOCK" screen appears.
If a SiriusConnect tuner is not connected to this unit,
“Check Sirius Tuner” appears.
y
If the Parental Lock code number is already set,
“PIN:___” appears instead of “NEW PIN:0000”. Refer to
step 4 and then proceed the operations.
2 Enter the desired 4-digit code number by
using the numeric buttons (
A
).
3 Press 8ENTER to confirm the code number.
“OK” and then the SIRIUS Satellite Radio channel
list appears. Refer to the step 5 and then proceed the
operations.
4 Enter the 4-digit code number you set in step
2 above to unlock the protection.
When the code number is correct, “OK” and then the
SIRIUS Satellite Radio channel list appears.
5 Press 8l / h repeatedly to select the
desired channel category and then press
8k / n repeatedly to select the channel you
want to lock.
In the SIRIUS Satellite Radio channel list screen, this unit
outputs the sound of the selected channel even if the
channel is locked.
6 Press 8ENTER to lock the selected
channel.
Check mark appears before the locked channel.
y
When you select the locked channel and press 8ENTER,
this unit unlocks the selected channel.
7 Repeat steps 5 and 6 to lock the channels
you want.
8 Press 7BAND to exit from the “PARENTAL
LOCK” screen.
This unit is tuned into the last channel you select in
the “PARENTAL LOCK” screen. If the channel is
locked, this unit is tuned into “184 SIRIUS Weather
& Emergency” or “000 Sirius ID”.
y
• If you forget or want to change the Parental lock code number,
use “SIRIUS PIN” (page 103) to reset the Parental Lock code
number.
• Selecting “ALL” in “INITIALIZE” (page 103) will cancel all
parental locks.
■ Tuning into the locked channels
You can tune into the locked channels by the Direct
number access mode or preset tuning mode. When you
tune into the locked channel, following message appears
in the front panel display. Enter the code number you set
for the Parental Lock feature by using the numeric buttons
(
A
) or press MENT to cancel the tuning.
• If the entered code number is incorrect, “Wrong” appears in the
front panel display and this unit is tuned into the previously
selected channel.
• If a channel is unlocked, you can also select the channel in Zone
2 and Zone 3.
Before performing the following operations, set the operation
mode selector on the remote control to ESOURCE and then
press 3SIRIUS.
Setting the Parental Lock
Note
PARENTAL LOCK
NEWPIN:0000
[p]/[[]:Cursor
[0] [9]:Number
[ENT]:Enter
-
Note
Notes
018 LOCKED
PIN:
____
Channel number