Filter
Top Products
54 En
XM® Satellite Radio tuning
2 Press GPRESET/TUNING/CH l / h (or
8PRESET/CH k / n) repeatedly to search
for a channel within all channels.
y
You can search for a channel quickly by pressing and holding
GPRESET/TUNING/CH l / h (or 8PRESET/CH k / n).
■ Category Search mode
1 Press ISEARCH MODE (or HSRCH
MODE) repeatedly to select “CAT SEARCH”.
2 Press KCATEGORY (or 8A-E/CAT. l / h)
repeatedly to change the channel category.
3 Press GPRESET/TUNING/CH l / h (or
8PRESET/CH k / n) repeatedly to search
for a channel within the selected channel
category.
y
You can search for a channel quickly by pressing and holding
GPRESET/TUNING/CH l / h (or 8PRESET/CH k / n).
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting the XM Satellite Radio preset
channels” (page 55).
1 Press ISEARCH MODE (or HSRCH
MODE) repeatedly to select “PRESET
SEARCH”.
2 Press KCATEGORY (or 8A-E/CAT. l / h)
repeatedly to change the preset channel
group (A to E).
3 Press GPRESET/TUNING/CH l / h (or
8PRESET/CH k / n) repeatedly to change
the preset channel number (1 to 8).
y
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) (A).
■ Direct number access mode
1 Press HSRCH MODE on the remote control
repeatedly to select “ALL CH SEARCH” or
“CAT SEARCH”.
2 Press the numeric buttons (A) to enter the
desired three-digit channel number.
For example, to enter the number 123, press the
numeric buttons (A) as shown below.
y
• To display the XM Radio ID number in the front panel display,
select channel “0”.
• To enter a one-digit or two-digit channel number, press the
numeric buttons (
A
) on the remote control and then press
MENT to confirm the input number.
• Instead of pressing MENT to tune into the channel
immediately, you can wait a few seconds until this unit confirms
the entered channel number.
• Pressing a button other than the numeric buttons (
A
) or MENT
cancels the Direct Number Access mode procedure.
1 2 3