Filter
Top Products
GETTING STARTED
27
BASIC OPERATION
3
English
■ Setting speaker channels
You can adjust the delay times (for center and surround
speakers only) and volume level for individual speakers.
These adjustments let you optimize the sound of your system
to best suit your surroundings and setup.
Press
SURR on the remote control to select the multi-
channel surround mode before adjusting the speaker settings.
1 Press s to stop playback, then press SET UP.
2 Press repeatedly to select [AUDIO SETUP PAGE].
3 Press / to highlight [SPEAKER SETUP],
then press .
4 Press / to highlight one of the options below,
then press .
[SPEAKER VOLUME] – Volume level setting for
individual speakers (–6dB to +6dB).
[SPEAKERS DELAY] – Delay time settings is in
relation to the listening position/distance for center
and surround speakers (0 MS to 15 MS).
5 Press / to adjust the setting that best suit your
surround sound needs.
6 Press ENTER (OK) to confirm.
7 To return to the previous menu, press .
To exit the menu, press SET UP.
– Use a longer delay time settings when the surround
speakers are closer to the listener than the front
speakers.
– A test tone will be automatically generated to help
you judge the sound level of each speaker.
Note
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
SPEAKERS VOLUME
SPEAKERS DELAY
AUDIO SETUP PAGE
SPEAKER SETUP PAGE
Notes
0dB
0dB
0dB
0dB
0dB
0dB
FRONT LEFT
FRONT RIGHT
CENTER
SUBWOOFER
SURROUND L
SURROUND R
SPEAKER VOLUME SETUP
0 MS
0 MS
0 MS
CENTER
SURROUND L
SURROUND R
SPEAKER DELAY SETUP