Open as PDF
DVD SETUP MENU OPTIONS
4 Press / to highlight one of the following
Increase the value to brighten the picture or vice versa.
Zero (0) is the average setting value.
Increase the value to sharpen the picture or vice versa.
Zero (0) is the average contrast.
Increase or decrease the value to change the color
phase of the picture. Zero (0) is the average setting
Increase the value to enhance the color in your picture
or vice versa. Zero (0) is the average color setting
5 Press / to adjust the setting that best suits your
6 Repeat steps 4 and 5 to adjust other color features if
7 Press ENTER (OK) to confirm.
(U.K and Europe models only)
This setting allows you to toggle the output of the video
signal between RGB (on SCART) and Y Pb Pr (YUV).
Selecting the black level (U.S. and
Canada models only)
If you set the TV type to NTSC, set black level shift to
ON. This will improve the color contrast during playback.
The black level setting has no effect if the TV type is set to
PAL.(See “Selecting the TV type” on page 24.)
Select this to enhance the black level.
Select this for the standard black level setting.
(U.S. and Canada models only)
Closed captions are data hidden in the video signals of
specific discs, and are invisible without the use of a
special decoder. The difference between subtitles and
captions is that subtitles are intended for hearing persons
and captions are for the hearing impaired. Subtitles rarely
show all of the audio. For example, captions show sound
effects (e.g., “phone ringing” and “footsteps”), while
subtitles do not. Before you select this function, please
ensure that the disc contains closed caption information
and your TV set also supports this function.
1 In [VIDEO SETUP PAGE], press / to
highlight [CLOSED CAPTION], then press .
To enable the closed caption function.
To disable the closed caption function.
2 Press / to select a setting, then press ENTER
(OK) to confirm your selection.