Open as PDF
■ Connecting external AV components
If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the following AV
jacks on the DVD receiver, you can enjoy those AV sources with the DVD receiver. Also, you can record AV sources
played on the DVD receiver using the recording equipment. This section provides some examples of other AV equipment
connections. For information on your AV equipment, refer to the manual provided.
Viewing and listening to
1 Connect the VCR to the TV as shown.
2 Connect the DVD receiver’s AUX IN jack to the
AUDIO OUT jacks on your VCR.
Before starting operation, press AUX to select “
” in order to activate the input source.
Using the VCR for recording DVD
Some DVDs are copy-protected. You cannot record or dub
protected discs using a VCR.
1 Connect the DVD receiver’s S VIDEO jack output to
the S-VIDEO IN jack on your VCR.
2 Connect the DVD receiver’s LINE OUT jacks to the
AUDIO IN jacks on your VCR.
This will allow you to make analog stereo (two
channels, right and left) recordings.
AUX INTV INLINE OUT
DIGITAL INVIDEO OUT (DVD ONLY)
VCR (for example)