Filter
Top Products
81 En
Remote control features
ADVANCED
OPERATION
English
You can program remote control codes from other remote
controls. Use the learn feature if you want to program
functions not included in the basic operations covered by
the remote control codes, or an appropriate remote control
code is not available. You can program the function of
other remote control to the buttons in the highlighted areas
in the following illustration. The buttons can be
programmed independently for each input area.
The remote control transmits infrared rays. If the other remote
control also uses infrared rays, this remote control can learn most
of its functions. However, you may not be able to program some
special signals or extremely long transmissions. Refer to the
operating instructions for the other remote control.
1 Set the operation mode selector to
L
SOURCE and then press an input selector
button (B), or to select a an input area.
Make sure that the operation mode selector is set to
L
SOURCE. When you set the operation mode selector to
L
AMP and program a remote control codes from other
remote controls, the programmed key cannot operate the
amplifier function of this unit.
2 Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
3 Press
T
LEARN using a ballpoint pen or
similar object.
“LEARN” and the name of the selected input area
(ex. “DVD”) appear alternately in the display window
(
J
) on the remote control.
• Do not press and hold
T
LEARN. If you hold it down for
more than 3 seconds, the remote enters the remote control
code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 3.
4 Press the button for which you want to
program the new function.
“LEARN” appears in the display window (
J
) on the
remote control.
Programming codes from other
remote controls
Note
Note
V
-
AUX/DOCK
–
+
+
––
+
TV MUTE
TV INPUT
MUTE
AV
TV
1234
VOLUME
TV VOL TV CH
TV
SOURCE
AMP
SELECT
DTV/CBL
VCR
DVR
DVD
TUNER
MD/CD-R
CD
PHONO
MULTI CH IN
POWER
POWER
SCENE
POWER
STANDBY
ENTER
DISPLAY
AUDI O
MENU
TITLE
4
3
2
ENT
+
10
0
9
5
1
7
6
8
RETURN
ON
OFF
CLEAR
LEARN
RENAME
MACRO
REC
FREQ/TEXT EON MODE- PTY SEEK- START
STRAIGHT
PURE DIRECT
A/B/C/D/E
PRESET/CH
SET MENU
BAND
LEVEL
SLEEP
STEREO
SUR. DECODE
NIGHT
CLASSICAL
LIVE/CLUB
ENTERTAIN
ENHANCER
MOVIE
Notes
V
-
AUX/DOCK
AV
TV
1234
SELECT
DTV/CBL
VCR
DVR
DVD
TUNER
MD/CD-R
CD
PHONO
MULTI CH IN
POWER
POWER
SCENE
POWER
STANDBY
5 to 10 cm
Other remote control
LEARN