Yamaha DSP-AX861SE Home Theater System User Manual


  Open as PDF
of 117
 
ADVANCED SOUND CONFIGURATIONS
53 En
ADVANCED
OPERATION
English
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
You cannot change the sound field parameter values when
“MEMORY GUARD” in “OPTION MENU” is set to “ON” (see
page 75). If you want to change the sound field parameter values,
set “MEMORY GUARD” to “OFF”.
1 Turn on the video monitor connected to this
unit.
2 Set the operation mode selector to
L
AMP
and then press
R
DISPLAY on the remote
control.
The following status screen appears in the OSD.
3 Press one of the sound field program
selector buttons (
U
) repeatedly to select the
desired sound field program you want to
adjust.
4 Press
D
k / n to select the desired sound
field parameter and then
D
l / h to change
the selected sound field parameter value.
y
• For details about the function and control range of each
sound field parameter, see page 55.
• When you set a sound field parameter to a value other than
the initial factory settings, an asterisk mark (*) appears by
the sound field parameter name in the OSD.
• The available sound field parameters for some of the
sound field programs may be displayed on more than one
page in the OSD. In this case, press
D
k / n to scroll
through pages.
• If you press and hold
D
l / h to change the sound field
parameter value, the initial factory settings are shown
momentarily in the front panel display.
• Use the “PARAM. INI” feature in “OPTION MENU” to
initialize the parameters of each sound field program
within a sound field program group (see page 75).
• You can select the amount of time that the current status is
displayed in the OSD by using the “OSD-AMP” parameter
in “OPTION MENU” (see page 74).
5 Press
R
DISPLAY to turn off the sound field
parameter display.
Advanced sound configurations
Changing sound field parameter
settings
Note


NIGHT:OFF

A.SEL:HDMI
INPUT:DVD

Sci-Fi
MOVIE
STATUSVOL:-40.0dB
PARAMETER
MOVIE
. Sci-Fi 1/2
PROLOGIC
DSP LEVEL;;;;0dB
P.INIT.DLY;;16ms
P.ROOM.SIZE;;1.0
S.INIT.DLY;;20ms
[RETURN]:STATUS
Cursor
 previous next