Filter
Top Products
33
PLAYBACK
BASIC
OPERATION
English
■ Remote control operation
Press AMP to select the AMP mode, then press
one of the sound field program buttons to select
the desired program.
The name of the selected program appears in the front
panel display.
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
•When you select an input source, this unit automatically selects
the last sound field program used with that source.
•Sound field programs cannot be selected when MULTI CH
INPUT is selected.
•Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz, then sound field
programs will be applied.
■ Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital EX
or DTS-ES decoders.
Press AMP to select the AMP mode, then press
EXTD SUR. on the remote control to switch
between 5.1 and 6.1/7.1-channel playback.
To select a decoder, press j / i repeatedly when
PLIIxMusic (etc.) is displayed.
Auto (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
Decoders (select with j / i)
You can select from the following decoders depending on
the format of the software you are playing.
PLIIxMovie
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic IIx movie decoder.
PLIIxMusic
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital signals in 6.1/7.1 channels
using the Dolby Digital EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS-ES decoder.
EX
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Dolby Digital EX decoder.
Off (OFF)
Decoders are not used to create 6.1/7.1 channels.
y
When “SUR. B L/R SP” is set to SMLx1 or LRGx1 (see
page 58), the surround back channel will be output from the left
SURROUND BACK speaker terminals.
Notes
TRANSMIT
RE-NAME
INPUT MODE
STANDBY
SYSTEM
POWER
AB
PHONO
CDMD/CD-RTUNERV-AUX
DVD
AMP
POWERPOWER
REC
AUDIO
AVTV
SELECT
VCR 1DTV/CBL DVR/VCR2
MULTI CH IN
SLEEP
CLEARLEARN
MUTE
MENUTITLE
CH CH
SET MENU
LEVEL
PRESET/CH
SRCH MODE
A/B/C/D/E
TV INPUT
TV VOL
ON SCREEN
STRAIGHT
MOVIEENTERTAINMUSICSTEREO
4321
8
10
7
09
65
ENT.
PURE DIRECT
EXTD SUR.STANDARDSELECT
NIGHT
SPEAKERS
AB
EFFECTMEMORY
CHP/INDEX
DISPLAYRETURN
TV MUTE
ENTER
TV VOL
PRESET
Sound field
program
buttons
AMP
CD PHONOTUNER
MD/CD-R
DVD
DTV/CBL
V-AUX
VCR1
DVR/VCR2
VOLUME
A
SP
dB
HiFi DSP
L R
TV Sports
MOVIEENTERTAINMUSICSTEREO
4321
8
10
7
09
65
ENT.
PURE DIRECT
EXTD SUR.STANDARDSELECT
NIGHT
SPEAKERSAB
CHP/INDEX
AMP
Program name
7
EXTD SUR.
AMP
CH CH
TV VOL
TV MUTE
ENTER
TV VOL
PRESET
PRESET