Filter
Top Products
27
AUTO SETUP
PREPARATION
English
■ If a warning screen appears
1 Press ENTER to display detailed information
about the warning.
Press j / i to switch between warning messages.
For details about each message, see page 29.
y
•Warnings let you know about potential problems detected
during auto setup. Warnings will not cancel the auto setup.
•The number of warnings is displayed to the right of
“WARNING”.
•When the warning is not applicable to a speaker, “– –” is
displayed.
2 When you are finished, press ENTER to
return to the RESULT:EXIT screen.
Continue from step 7 on page 26.
•If you change speakers, speaker positions, or the layout of your
listening environment, perform auto setup again to re-calibrate
your system.
•Depending on listening environments, SWFR PHASE:REV
appears in AUTO:CHECK and SUBWOOFER PHASE
parameter in SET MENU (see page 59) is automatically set to
REVERSE. To select the desired setting, change the
SUBWOOFER PHASE parameter in SET MENU.
•In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoofer.
Notes
WARNING:W-1
.<OUT OF PHASE>
.Reverse Channel
.FL __
.CENTER
.PL PR
.SL SR
.SBL SBR
[<]/[>]:Select
[ENTER]:Return
.WARNING (3)
RESULT
SP : 5/4/0.1
DIST:10.0/ 12.0ft
LVL: -9.0/+6.5dB
.>SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
p
p
RESULT:EXIT
W-1 example screen