Yamaha CRW8824SX Series CD Player User Manual


 
12
Setting Up The CRW8824SX Drive
There are three stages to setting up your CRW8824SX drive.
Installing a SCSI adapter card
You will need to open the casing of your computer and insert a SCSI adapter
card (sold separately) if one has not been installed already.
n You will need a Phillips screwdriver to open the casing of the computer and to
secure the SCSI adapter card in its slot.
Connecting the drive
You will need to connect your CRW8824SX drive to your computer’s SCSI
adapter card using a SCSI cable. You will also need to connect the included
power cable between the drive and an electrical outlet.
Verifying the Hardware Installation
Before you can begin using your CRW8824SX drive, you need to verify that it
has been installed and recognized correctly.