Yamaha CRW3200NB CD Player User Manual


 
Troubleshooting
33
8
The error message Buffer Underrun is displayed.
If your CD writing software supports Buffer Underrun Protection, you must
activate it. For more details, refer to the documentation that comes with your
CD writing software.
To prevent the occurrence of a buffer underrun and to increase the efficiency of
data writing, try the following:
Reduce the data writing speed.
Create an image file on the hard drive.
Optimize the hard drive. (Defragmentation)
Do not start any application software including screen savers during data
writing.
Deactivate the power management for the hard drive.
Set the data transfer mode of any IDE device such as a hard drive or CD-
ROM drive to DMA. (P. 23)
Deactivate the Windows Active Desktop.
Quit all memory-resident software programs.
Check your CD writing software settings with the documentation that comes
with it.
A writing error may happen if the drive is vibrated while data is being written on a
CD-R or a CD-RW disc.
9
Other problems
Isnt more than one CD writing software installed on your computer?
Installing more than one CD writing software on a computer may cause
instability of operation. (The CD writing software that come with the
CRW3200E drive can be used together without problems.)
CD writing software must support the CRW3200E drive in order to recognize
the drive.
Contact the manufacturer of your CD writing software to see whether the
software supports the CRW3200E drive.
Is the power capacity of your computer sufficient?
The computer may not operate due to insufficient power capacity.
Check the specifications of your computer and its current environment. The power
consumption of the CRW3200E drive is 11 W during writing/reading.
Note