Filter
Top Products
22
Loading/Ejecting a Disc
Prior to the operation, check that the CRW3200IX drive is turned on.
1
Open the disc tray by pressing the eject button.
2
Place the disc onto the disc tray properly with its label facing
upward.
Or remove the disc from the disc tray carefully so not to damage it.
3
Close the disc tray by pressing the eject button or by gently
pushing the disc tray into the drive.
• Place or remove the disc after the disc tray has fully opened. Do not push or pull
the disc tray with applying excessive force to avoid damage to the drive or the
disc.
• The disc tray does not open while the application software prohibits ejecting,
including when the drive accesses the disc.
Note
Press the eject button
Place or remove the disc
onto/from the disc tray